Research Papers Published in International Journals
Experimental investigation of surface roughness for fused deposition modeled part with different angular orientation, P.Sreedhar, Mathi kumar in international journal of advanced design and manufacturing technology ISSN 2008-1421, azad university, majlesi branch, Iran.
Computational Analysis of 30Kw Contra Rotor Wind Turbine, Santhana Kumar, R.Joseph Bensingh, International Scholarly Research Network ISRN Renewable Energy, Article ID 939878, 5 pages.
Computational & Experimental Analysis of a Counter-rotating Wind Turbine System Santhana Kumar, R.Joseph Bensingh Journal of Scientific and Industrial Research, Vol. 72, May 2013,pp.300-306.
Design, Development and Simulation of Low cost Automation for SPM, Sathyajit, R.Joseph Bensingh, International Journals of Engineering Science and Humanities, Volume1,Issue1, ISSN No. 2250-3552.
Design and Analysis of Wheel Head Unit for CNC grinding SPM International, Imran, R.Joseph Bensingh, Journals of Engineering Science and Humanities, Volume1,Issue1, ISSN No. 2250-3552.
Development of sensor array helmet for 90 channel whole-cortex magneto encephalography system using fused deposition modeling technique, P.Sreedhar, R.Joseph Bensingh, international journal of advanced manufacturing technology manuscript number - ijamt-d-12-09983, ISSN 0268-3768 (print) 1433-3015 (online), Springer publications.
Material preparation & melt flow analysis of HDPE/PA6 blend for fused deposition modeling technique, P.Sreedhar, R.Joseph Bensingh, international journal of advanced manufacturing technology manuscript number - ijamt-d-12-09983, ISSN 0268-3768 (print) 1433-3015 (online), Springer publications.
Design and Development of HDPE/POM Acetabular Cup for Total Hip Replacement, P.Sreedhar, R.Joseph Bensingh, International Journal of Biomaterials , Elsevier Publications - Under Review.
Synthesis and Modification of Epoxy monomers and Their Composites: A Review, Nagarjuna Reddy Paluvai, Smita Mohanty, S K Nayak, Polymer Plastics Technology and Engineering (DOI:10.1080/03602559.2014.919658).
Synthesis and Characterization of Acrylated Epoxidized Castor Oil Nanocomposites, Nagarjuna Reddy Paluvai, Smita Mohanty, S K Nayak. International Journal of Polymer Analysis and Characterization (2015), 20, 4, 298-306.
Regenerated cellulose fiber as impact modifier in long jute fiber reinforced polypropylene composites: Effect on mechanical properties, morphology, fiber breakage, Nalini Ranganathan, Kristina Oksman, S K Nayak , Journal of applied polymer science - Journal of Applied Polymer Science (2015), 132, 3, 41301.
Thermally Sprayable Anti-Corrosion Marine Coatings Based on MAH-g-LDPE/UHMWPE Nanocomposites - K. Jeeva Jothi, A.U. Santhoskumar, Syed Amanulla and K. Palanivelu - Journal of Thermal Spray Technology (2014),23, 8, 1413-1424.
Preparation and performance evaluation of castor oil-based polyurethane prepolymer/ polylactide blends. - Gurunathan Thangavel , Smita Mohanty, S. K.Nayak - Journal of Materials Science (2014), 49,23, DOI: 10.1007/s10853-014-8509-4.
Effect of reactive organoclay on physicochemical properties of vegetable oil-based waterborne polyurethane Nanocomposites. T. Gurunathan Smita Mohanty and Sanjay K. Nayak, RSC Advances (2015), 5, 15, 11524-11533.
Isocyanate terminated castor oil-based polyurethane prepolymer: Synthesis and characterization, T. Gurunathan Smita Mohanty and Sanjay K. Nayak, Progress in Organic Coating (2015), 80, 39-48.
Poly(alkyl lactate acrylate)s Having Tunable Hydrophilicity - M. Purushothaman, P. Santhana Gopala Krishnan and S. K. Nayak - Jounal of applied Polymer Science Accepted (2014), 131, 2, DOI: 10.1002/app.40962.
Studies on Hydrophilicity and thermal stability of Poly (isoalkyl lactate methacrylate)s - Purushothaman, M., Krishnan, P. S. G., and Nayak, S. K., J. Macromol. Sci. A: Pure Appl. Chem. (2015), 52, 3, 202-209.
Tunable Hydrophilicity of Poly (ethyl lactate acrylate-co-acrylic acid) - Purushothaman, M., Krishnan, P. S. G., and Nayak, S. K. Journal of Renewable materials (2015), 3, 4, 10, 292-301.
Effect of Isoalkyl Lactates as Pendant Group on Poly(acrylic acid) - Purushothaman, M., Krishnan, P. S. G., and Nayak, S. K. Journal of Macromolecular Science, Part A: Pure and Applied Chemistry (2014), 51:6, 470-480.
Facile fabrication of core-shell Pr6O11-ZnO modified silane coatings for anti-corrosion applications - K. Jeeva Jothi, K. Palanivelu, Applied Surface Science (2014), 288, 60-68.
Effect of Nanoclays on Silica Network for Hydrophobic Coatings by Sol-Gel Method - K. Jeeva Jothi, K. Palanivelu, Materials Focus (2014), 3, 105-111.
Recent Development and Future Trends in Coir Fiber Reinforced Green polymer Composites: Review and Evaluation - Jayavani S, Harekrishna Deka, Varghese T O, Nayak S.K. - Polymer Composite - (2015), DOI: 10.1002/pc.23529.
Unsaturated polyester toughened Epoxy composites: Effect of Sisal Fiber on Thermal and Dynamic mechanical behavior - Nagarjuna Reddy Paluvai, Smita Mohanty, S K Nayak, Journal of Vinyl and Additive Technology (2015) : DOI: 10.1002/vnl.21491.
Effect of Nanoclay on the Mechanical, Thermal and Water Absorption Properties of an UP-Toughened Epoxy Network. Nagarjuna Reddy Paluvai, Smita Mohanty, S K Nayak - Journal of adhesion (2015): 10.1080/00218464.2015.1047828
Studies on Thermal degradation and Flame Retardant behavior of the UP toughened Epoxy Sisal fiber reinforced nanocomposites - Nagarjuna Reddy Paluvai, Smita Mohanty, S K Nayak Journal of Applied Polymer Science - (2015): 132, 24, 42068, DOI: 10.1002/app.42068.
Effect of cloisite 30b clay and sisal fiber on dynamic mechanical and fracture behavior of unsaturated polyester toughened epoxy network. Nagarjuna Reddy Paluvai, Smita Mohanty, S K Nayak- Polymer Composites (2015): DOI: 10.1002/pc.23480.
Mechanical and thermal properties of sisal fiber reinforced acrylated epoxidized castor oil toughened diglycidyl ether of bisphenol A epoxy nanocomposites - Nagarjuna Reddy Paluvai, Smita Mohanty, S K Nayak The Journal of Reinforced Plastics and Composites (2015)- DOI: 0731684415595126.
Cure kinetics of exfoliated bio-based epoxy/clay nanocomposites developed from acrylated epoxidized castor oil and diglycidyl ether bisphenol A networks - Nagarjuna Reddy Paluvai, Smita Mohanty, S K Nayak- High Performance Polymers (2015) 201527: 918-929.
Fabrication and Evaluation of Acrylated Epoxidized Castor oil toughened Diglycidyl ether Bisphenol A nanocomposites - Nagarjuna Reddy Paluvai, Smita Mohanty, S K Nayak RSC Advances - The Canadian Journal of Chemical Engineering (2015), 93,12, 2107-2116.
Epoxidized castor oil toughened Diglycidyl Ether of Bisphenol A epoxy nanocomposites: structure and property relationships - Nagarjuna Reddy Paluvai, Smita Mohanty, S K Nayak - Polymers Advanced Technologies (2015): DOI: 10.1002/pat.3584.
Synergistic effect of silane modified nanocomposites for active corrosion protection - K. Jeeva Jothi, K. Palanivelu, Ceramics International (2013), 39, 7619-7625.
Effect of nano-calcium carbonate content on the properties of poly(urethane methacrylate) nanocomposites. Purushothaman, M., Krishnan, P. S. G., and Nayak, S. K. J. Thermoplast. compos. Mater (2013). DOI: 10.1177/0892705712475011.
Studies on Permeability of Sisal Fiber Mat during Thermoset Resin Filling in Vacuum Infusion Process - Rajkumar subbaih, Jimmy Tjong, Sanjay K.Nayak, Mohini Sain The Canadian Journal of Chemical Engineering (2015), 93: 1364-1370. doi:10.1002/cjce.22228
Investigation of crystallinity, miscibility and phase morphology of impact modified bio based polyester blend of Poly (trimethylene terephthalate) and Poly (butylene adipate-co-terephthalate). Materials Chemistry and Physics- Communicated.
Non-isothermal crystallization kinetics of bio based polyester blend of Poly (trimethylene terephthalate) and Poly (butylene adipate-co-terephthalate) - Suresh Dhandapani, S.K.Nayak, Smita Mohanty- Polymer Blends, Polymer Science Series A - (2015), 57,5, 628-634.
Impact Response, Dynamic Mechanical Analysis and Morphological Characteristics of Impact Modified Long Jute Fiber Reinforced Thermoplastic Composites - Ranganathan,N.; Oksman, K.; Nayak, S.K.; Sain; Journal of Applied polymer science) - DOI: 10.1002/app.42981.
Structure property relation of hybrid biocomposites based on jute, viscose and polypropylene: Effect of fiber content and length on fracture toughness and fatigue properties - Ranganathan,N.; Oksman, K.; Nayak, S.K.; Sain Composites Part A (2015)-10.1016/j.compositesa.2015.10.037.
Effect of LFT-D process on fiber dispersion and mechanical properties of viscose fiber reinforced thermoplastic composites - Ranganathan,N.; Oksman, K.; Nayak, S.K.; Sain Polymer for Advanced Technologies (2015) - DOI: 10.1002/pat.3742.
Wetting behavior of soy-based resin and unsaturated polyester on surface-modified sisal fiber mat - S Rajkumar, J Tjong, SK Nayak, M Sain - Journal of Reinforced Plastics and Composites (2015): 0731684415580630.
Permeability and mechanical property correlation of bio based epoxy reinforced with unidirectional sisal fiber mat through vacuum infusion molding technique - S Rajkumar, J Tjong, SK Nayak, M Sain- Polymer Composites (2015): DOI: 10.1002/pc.23797.
Anti-corrosion coatings on SS 304 by incorporation of Pr6O11-TiO2 in siloxane network. KJ Jothi, K Palanivelu - Surface Engineering and Applied Electrochemistry (2015), 51, 6, 589-597.
Compatibility effect of titanium dioxide nanofiber on reinforced biobased nanocomposites: Thermal, mechanical, and morphology characterization. Suresh Dhandapani, Nayak SK, Smita Mohanty; Journal of Vinyl & Additive Technology, (2015), DOI 10.1002/vnl.21475.
Surface modification of oil palm fruit bunch and fibre reinforcement effect on bio-based polyester matrix composites: Dynamic, morphological, thermal and mechanical properties. Suresh Dhandapani, Nayak SK, Smita Mohanty, Journal of Elastomers & Plastics (2015), DOI: 10.1177/0095244315580458.
Investigation of Miscibility, Crystallinity and Phase Morphology of a Novel Bio Based Poly (Trimethylene terephthalate) /Poly (Butylene adipate-co-terephthalate) Blend - Suresh Dhandapani, Nayak SK, Smita Mohanty; Polymer Science Series A (2015), DOI: 10.1134/S0965545X15070020.
Analysis and evaluation of biobased polyester of PTT/PBAT blend: thermal, dynamic mechanical, interfacial bonding and morphological properties. Suresh Dhandapani, Nayak SK, Smita Mohanty; Polymers for Advanced Technologies (2016), DOI: 10.1002/pat.3752.
Hyperbranched Polymers for Coating Applications: A Review. T. Gurunathan, Smita Mohanty and Sanjay K. Nayak, Polymer-Plastics Technology and Engineering (2016), 55,1, 92-117.
Effect of butyl lactate methacrylate content on the properties of acrylic acid copolymers. Purushothaman, M., Krishnan, P. S. G., and Nayak, S. K., Functional Polymers, Polymer Science Series A (2016), 1-11.
Cure kinetics characterization of soy-based epoxy resins for infusion molding process - Subbiah, R., Tjong, J., Nayak, S. K. and Sain, M. (2016), Can. J. Chem. Eng.. doi:10.1002/cjce.22504.
Praseodymium oxide Modified Hybrid Silane Coatings for Anti-corrosion, K. Jeeva Jothi, K. Palanivelu, Applications Surface Engineering, (2016), 32,1, 47-52.
State of the art and future prospective of Poly (lactic acid) based blends and composites - V H Sangeetha, H Deka, T O Varghese, S K Nayak- Polymer Composites, (2016), DOI- 10.1002/pc.23906.
Structural Effect of Phenalkamines on mechanical and tribo-performance of bio-based epoxy system. Rajesh Panda, Jimmy Tjong, Sanjay K.Nayak, Polymer-Plastics Technology and Engineering - Under Review.
Mechanical and Thermal Properties of Pineapple Leaf Fiber Reinforced with Epoxy Composites - T.T. Nagarajan, A. Suresh Babu, K. Palanivelu, S.K. Nayak - Composites Part-B - Communicated (2014).
Cure kinetics of epoxy resins with bio based curing agent studied by non-isothermal DSC data - Rajesh Panda, Jimmy Tjong, Sanjay K.Nayak, Thermochimica Acta - under Review.
Prediction of Single Natural Fiber Orientation in an Injection Molded Component - Rajasekharan K, Jimmy Tjong, Sanjay K.Nayak, Mohini Sain - Composites Part A - Under Review.